top of page

Design Assignment in Turkey: Notarization, Partial Assignment of Multiple Designs, Designers' Rights and Unregistered Designs

Nov 12
12 min read
KEY TAKEAWAY: Like trademark and patent assignments, design assignments in Turkey must be made in writing and notarized (Code 6769, Art. 148/4), and they cannot be asserted against third parties acting in good faith until recorded in the register of the Turkish Patent and Trademark Office (TPTO) (Art. 148/5). The most important design-specific rule concerns multiple designs: a multiple design registration may be assigned in whole or in part, and in a partial assignment the sequence numbers of the designs being assigned must be listed individually in the agreement (Regulation, Art. 125/3). Failing to identify clearly which designs are being assigned leads to serious problems of proof. In a decision upheld by the Court of Cassation, an action was based on a protocol providing that the designs would pass to the other party if a debt was not paid; the absence of any list, in the protocol or in a separate record, identifying which designs were covered was among the grounds for dismissal (Court of Cassation, 11th Civil Chamber, 05.11.2025, File No. 2025/1659, Decision No. 2025/6642). Design assignments should therefore annex the sequence numbers together with the registration number and, ideally, the design images.

In sectors such as furniture, textiles, packaging, lighting and automotive components, the value of a company's product range rests largely on its registered designs. These designs change hands in company acquisitions, sales of product lines, transfers from designers or design agencies to manufacturers, and intra-group restructurings. Although design assignments are subject to the same general rules as trademark and patent assignments, they call for particular care because of design-specific features such as the multiple application system, designers' rights, deferment of publication and unregistered designs.


This article examines the formal requirements for design assignments in Turkey, partial assignment of multiple designs, the chain of title and designers' rights, term and renewal, the assignment of unregistered designs, the relationship with copyright and the assignment of international registrations under the Hague System, in light of recent decisions of the Turkish Court of Cassation.


Rudolf von Alt, Courtyard of the Doge's Palace, Venice
Rudolf Ritter von Alt (1812-1905), “Courtyard of the Doge's Palace, Venice”

Legal Framework

Under Art. 70/1 of the Industrial Property Code No. 6769 ("Code 6769"), the design right belongs to the designer or its successors and may be transferred. The form and recordal of the assignment are governed by Art. 148, which applies to all industrial property rights. The assignor's liability is regulated in Art. 76 and the effect of invalidity in Art. 79. The documents required for recordal and the procedure for partial assignment are set out in Art. 125 of the Regulation on the Implementation of the Industrial Property Code ("Regulation").


The general rules on trademark assignments, namely that notarization is a condition of validity, the importance of recordal for enforceability against third parties, and the apostille and translation requirements in cross-border transfers, apply equally to design assignments. This article focuses on design-specific issues.


Formal Requirements and Content of the Agreement

Under Art. 148/4 of Code 6769, a design assignment agreement must be in writing and notarized; notarization is a condition of validity. For recordal, the agreement must contain the number of the design being assigned (Regulation, Art. 125/1-c). Unlike patents, there is no mandatory requirement to declare the assignment price for designs; nevertheless, stating the price accurately is advisable for tax purposes and in view of potential disputes.


In addition to the elements mandatory for recordal, a sound design assignment agreement should also address the following:

  • The registration number, product name, and for multiple designs the sequence numbers assigned, together with the design images,

  • The names of the designers and a statement of how the design right passed to the assignor,

  • Warranties that the registration is valid, the next renewal date, and that there are no licenses, pledges, attachments or proceedings,

  • The fate of unregistered design rights, copyright and any foreign registrations relating to the same product,

  • Delivery of technical drawings, moulds, 3D files and samples,

  • Allocation of claims arising from pre-assignment infringements and pending proceedings,

  • Which party will record the assignment with the TPTO and within what time frame.


Partial Assignment of Multiple Designs

Design applications are often filed as multiple applications, in which several designs are included in a single application. Different products in a collection, or different variations of a product, are registered under the same application number with different sequence numbers. This structure provides a particular flexibility in assignments.


Under Art. 125/3 of the Regulation, a multiple design registration may be assigned in whole or in part. In a partial assignment, the sequence numbers of the designs assigned are listed individually in the agreement. The TPTO opens a new file under a new registration number in the name of the assignee for the designs assigned and issues a new registration certificate. The design is recorded with its original registration date; the date from which protection runs and the term of protection remain unchanged.


By way of example, assume that only designs nos. 3, 4 and 7 of a fictional furniture manufacturer's ten-design multiple registration are assigned. A new file covering those three designs is opened in the assignee's name; however, that file retains the same filing date and the same renewal timetable as the original registration.


The greatest practical risk in a partial assignment is leaving the designs assigned undefined. Sequence numbers in design registrations often do not correspond to product codes or catalogue numbers. In a decision upheld by the Court of Cassation, a usurpation action was brought on the basis of a protocol between a designer and a manufacturer providing that, if the designer did not pay its debt within two years, it would be deemed to have waived its rights in all its designs. The first instance court dismissed the action, noting that neither the protocol nor any other record listed which designs belonged to the claimant, that the claimant had not submitted any technical drawings or images relating to the design process, and that it had not exercised its right to be named as designer during registration; the judgment was upheld by majority (Court of Cassation, 11th Civil Chamber, 05.11.2025, File No. 2025/1659, Decision No. 2025/6642).


In partial assignments, it is therefore recommended that images of the designs be annexed to the agreement in addition to the sequence numbers, that the annexes be signed and covered by the notarization, and that the fate of variations retained by the assignor which closely resemble the designs assigned be regulated separately. Otherwise, the assignee and the assignor may each hold designs that produce the same overall impression on the informed user.


Chain of Title and Designers' Rights

Designers, Employees and External Service Providers

The question the assignee should examine most closely is whether the assignor is in fact entitled to the design. Under Art. 61/10 of Code 6769, if the applicant is not the designer, or is only one or some of the designers, the application must explain how the applicant acquired the right to file the design application. This statement is the first link in the chain of title.


Under Art. 73/1, unless otherwise provided by a specific agreement or the nature of the work, the employer owns designs made by employees in the course of their duties, or made during the employment relationship largely on the basis of the business's experience and work. For designs made under service relationships other than employment, ownership is determined by the provisions of the contract between the parties (Art. 73/4).


This last provision points to a risk frequently encountered in practice. Where relationships with freelance designers, design agencies or foreign design studios contain no express provision on the transfer of intellectual property rights, ownership may become disputed even though the design is registered in the manufacturer's name. When acquiring a design portfolio, it should therefore be examined under which agreements the designs were created and whether those agreements contain provisions on the transfer of intellectual property rights.


Risk of Usurpation

If a design has been registered in the name of a person who is not the true owner, the true owner may ask the court to order the transfer of the design to it or to recognise it as the owner of the design (Art. 71). A successful usurpation action may mean that the assignee loses the right it has acquired. Registrations made at times when the assignor was in dispute with a partner, former employee or business partner are therefore a risk indicator that should be examined separately.


The Right to Be Named as Designer

A designer who is not named in the application has the right to request to be named as designer; it may, however, also request that its name be kept confidential (Art. 61/10). This right is attached to the designer personally and does not pass to the assignee with the design right. The dissenting opinion in decision no. 2025/1659 cited above also emphasised that the right to be named as designer is a moral right and cannot be transferred. Even after acquiring the design right, the assignee may therefore face a request by the designer to be named in the register and in publications.


Co-Ownership and Indivisibility

Where a design is co-owned, each co-owner may freely dispose of its own share (Art. 70/2-a). However, even where a design application or design is co-owned, it cannot be divided for the purpose of assignment or the creation of rights over it (Art. 70/4). The fact that a multiple design may be partially assigned by sequence number does not mean that a single design can be divided. Where a share is assigned, it should also be borne in mind that licensing to third parties requires the unanimous consent of the co-owners (Art. 70/3).


Term, Renewal and the Absence of a Use Requirement

Registered designs are protected for five years from the filing date, renewable for successive five-year periods up to a total of twenty-five years (Art. 69/1). The renewal request must be filed within six months before the expiry of protection or, with a surcharge, within six months after expiry; the right in a design that is not renewed ends on the expiry date (Arts. 69/4 and 69/6).


If an assignment takes place close to a renewal date, the agreement should clearly state which party will renew and by what date. Allowing the renewal period to expire before the assignment is recorded is one of the most easily avoidable losses of rights for an assignee. For multiple designs, it should also be checked in the register whether renewal was made for all of the designs or only some of them.


An important feature distinguishing designs from trademarks and patents is that Code 6769 does not impose a use requirement on designs. While trademarks face revocation for non-use and patents face compulsory license risk for non-use, a registered design remains valid throughout its term even if not used. This means that in portfolio acquisitions, designs that are not being used also retain their value.


Designs with Deferred Publication

The applicant may request deferment of publication for thirty months from the filing or priority date. The design is then registered and entered in the register, but its visual representation and the application file are kept closed to third-party inspection (Art. 66/1-2). At the end of the deferment period, the publication fee must be paid and, where necessary, a visual representation suitable for publication must be filed; otherwise, protection is deemed never to have arisen (Art. 66/4).


Acquiring a design with deferred publication carries two specific risks. First, as the assignee cannot inspect the design's image in the register, it is difficult to confirm that the images supplied by the assignor match those on file. Second, if the publication fee is not paid at the end of the deferment period, protection is deemed retroactively never to have arisen. The assignment agreement should therefore regulate delivery of a copy of the application file to the assignee, the expiry date of the deferment period and which party will handle publication. It should also be borne in mind that, for an infringement action to be brought during the deferment period, the information in the register and the application file must have been communicated to the defendant (Art. 66/5).


Assignment of Unregistered Designs

Under Art. 55/4 of Code 6769, a design first made available to the public in Turkey is protected as an unregistered design. Unregistered designs are protected for three years from the date on which they were first made available to the public (Art. 69/2), and that protection is effective only against copying (Art. 59/2).


Since unregistered designs are not entered in the register, enforceability of their assignment against third parties cannot be secured through recordal. Although Code 6769 contains no separate formal rule for the assignment of unregistered designs, given that the formal requirement in Art. 148/4 may be applied to such assignments as well, making the assignment in writing and notarizing it is the safest course. The agreement should state the date on which the design was first made available to the public and the documents evidencing it (catalogue, trade fair records, e-commerce listings, social media posts), together with images of the design.


Overlap with Copyright

An original piece of furniture, lighting product or pattern may be protected not only by design rights but also as a work under the Law on Intellectual and Artistic Works No. 5846 ("Copyright Law"). Under Art. 58/3 of Code 6769, design protection is without prejudice to the protection provided by the Copyright Law where its requirements are met. However, the conditions under which a design is also protected as a work, i.e. the scope of cumulative protection, is a contested issue and will be addressed in a separate article.


What matters for assignments is that the assignment of the design right does not automatically transfer to the assignee any economic rights in the work. Under Art. 52 of the Copyright Law, contracts and dispositions relating to economic rights must be in writing and the rights concerned must be specified individually. For designs that may qualify as works, it is therefore a prudent approach to also assign the economic rights in the assignment agreement, listing them individually.


Consequences of Not Recording the Assignment

A notarized assignment agreement takes effect between the parties; however, rights arising from transactions not recorded in the register cannot be asserted against third parties acting in good faith (Art. 148/5). As a design-specific consequence, an invalidity action against a design is brought against the person recorded as the owner of the design on the date of the action (Art. 78/4). With an unrecorded assignment, the assignee may remain unaware of invalidity actions, oppositions and TPTO notifications concerning the design it has acquired. Since renewal notifications are also sent to the person on the register, the recordal request should be filed immediately after the notarial act.


Liability of the Assignor and Invalidity

If it subsequently emerges that the assignor was not entitled to assign the design right, the assignor is liable to the persons concerned (Art. 76/1). Where the design application is withdrawn or refused, or the registration is revoked or invalidated, Art. 79 applies unless the parties have provided for broader liability (Art. 76/2). Invalidity has retroactive effect; however, it does not affect contracts concluded and performed before the invalidity decision, and a full or partial refund of amounts paid may be claimed on equitable grounds (Arts. 79/2-b and 79/3).


Unlike patents, Art. 76 does not contain a provision linking the assignor's failure to disclose information on registrability to a presumption of bad faith. The assignee's protection is therefore left largely to the agreement. Since a design's novelty and individual character may be vulnerable to invalidity in view of catalogues, trade fairs and online publications prior to the filing date, the assignor's representations and warranties as to its own prior disclosures and the prior designs known to it should be written into the agreement.


International Design Registrations: The Hague System

Turkey is a party to the Hague Agreement Concerning the International Registration of Industrial Designs. The assignment of an international design registration covering Turkey is notified to WIPO for recording in the International Register, not to the TPTO. An assignment may cover only some of the designs in the international registration, or only some of the designated countries. It should also be borne in mind that the assignee must be entitled to hold international registrations under the Hague System. In portfolio transfers, it should not be overlooked that European Union design registrations do not cover Turkey, and that protection in Turkey requires a national registration or one obtained through the Hague System.


Cross-Border Assignments

Where one of the parties is foreign, signatures on an agreement signed abroad should be notarized by a local notary and that notarization completed with an apostille or consular legalisation. An agreement in a foreign language must be submitted together with a Turkish translation certified by a sworn translator (Regulation, Art. 125/1-ç). In design assignments, care should also be taken that the annexes containing the sequence numbers and images are covered by the translation and the notarization. These issues are discussed in more detail in our article on trademark assignments in Turkey.


Conclusion

Although design assignments are subject to the same formal rules as trademark and patent assignments, the assignee's main risks lie in identifying the designs being assigned and in the chain of title. A partial assignment without annexed sequence numbers and images, a design for which no assignment was obtained from an external service provider, or a deferred registration whose publication fee was not paid may fail to provide the protection the assignee expects, even if notarization and recordal are flawless. Design assignments should therefore be planned with an approach that takes into account both the specific rules of design law and its possible overlap with copyright.


Legislation and Case Law Referred To

Industrial Property Code No. 6769, Arts. 55, 58, 59, 61, 66, 69, 70, 71, 73, 76, 78, 79, 148 · Regulation on the Implementation of the Industrial Property Code, Art. 125 · Law on Intellectual and Artistic Works No. 5846, Art. 52 · Hague Agreement Concerning the International Registration of Industrial Designs

Court of Cassation, 11th Civil Chamber: 05.11.2025, 2025/1659 – 2025/6642


This article is intended for general information purposes only and does not constitute legal advice. The examples used in the article are fictional.


To prepare design assignment agreements in Turkey, review design portfolios before acquisition, coordinate notarization and apostille formalities, and complete recordals before the TPTO and WIPO, please contact us at info@goklulaw.com.


Key Contact:

Evren Fırat Göklü

Founding Partner | Attorney at Law | Trademark & Patent Attorney

 
 
bottom of page